Cleanroom Gloves

Kimtech Pure G5 Latex Gloves

Packaged in a Class 100 Cleanroom. AQL level of 1.5 for pinholesTextured palm & fingers. Beaded cuff, 10" length. Double-bagged with case liner. Recommended for ISO Class 5 or higher cleanroom environments.

Caution: This product contains natural rubber latex which may cause allergic reactions. Certificate of Analysis Chemical Resistance Database

  • ISO 5 (Class 100)
  • Textured palms and finger tips
  • 10" and 12" lengths
  • Beaded cuffs
  • Ambidextrous
  • Natural rubber latex for tactile sensitivity & comfort
Kimtech Pure G5 Class 100 Latex Gloves
Style Description Size Pack Qty
G5 Latex 10 in. Ambidextrous 100 gloves/bag, 10 bags/case
G5 Latex 12 in. Ambidextrous 100 gloves/bag, 10 bags/case

Specifications

CODEAFFILIATE #SIZEPALM WIDTH*
(mm)
LENGTH*
(mm)
Quantity
56805HC220S85255100 gloves/bag 10 bags/case
56806HC330M96255100 gloves/bag 10 bags/case
56807HC440L112255100 gloves/bag 10 bags/case
56808HC550XL118255100 gloves/bag 10 bags/case
56809HC2211S85305100 gloves/bag 10 bags/case
56810HC3311M96305100 gloves/bag 10 bags/case
56811HC4411L112305100 gloves/bag 10 bags/case
56812HC5511XL118305100 gloves/bag 10 bags/case

*As measured by ASTM D 3577;2.5 AQL1


General Description

Natural rubber, powder free, cleanroom gloves, straight finger, ambidextrous former with non-slip/textured finish at palm and fingers, beaded cuff, 10" or 12" nominal length. KIMTECH PURE G5 Latex gloves are certified Category III PPE classified by EC Council Directive 89/686/EEC.


Physical Property

Physical PropertyUnitUpper LimitTest Method (1.5 AQL)
WatertightnessNAPassASTM D 5151
Particulate Level ≥0.5 microns#/cm23000IEST-RP-CC005

Thickness

CodesSectionNominalNominalTest Method (2.5 AQL)
56805-56808Middle Finger8.27 mil 0.21 mmASTM D 6319
Palm7.09 mil 0.18 mm ASTM D 6319
Cuff4.72 mil0.12 mmASTM D 6319
56809-56812Middle Finger8.27 mil0.21 mmASTM D 6319
Palm 7.09 mil0.18 mmASTM D 6319
Cuff4.72 mil0.12 mmASTM D 6319

1 AQL levels defined according to ISO 2859-1 (current edition) Sampling Procedures for Inspection by Attributes.