Floor Cleaners

Perma Stat-Crete® Static Dissipating Concrete Finish

This static dissipative, water based epoxy/acrylate provides outstanding durability and abrasion resistance while eliminating electrostatic charges which can damage sensitive electronic components or equipment. Displays superb resistance to a wide variety of chemicals and solvents commonly found in industrial and commercial environments. When cured, Stat-Crete exhibits characteristics superior to solvent based urethanes and rivals those of solvent based epoxy coatings. Stat-Crete produces superior results when used on a broad range of concrete, ceramic and even vinyl composition tile surfaces.

Stat-Crete Static Dissipating Concrete Finish
Style Description Size Pack Qty
1-26G-16 Medium Gray Perma Stat-Crete Static Dissipating Concrete Finish 1 Quart 16/case
1-26G-04 Medium Gray Perma Stat-Crete Static Dissipating Concrete Finish Gallon 4/case
1-26G-05 Medium Gray Perma Stat-Crete Static Dissipating Concrete Finish 5 Gallon Each
1-26LG-16 Light Gray Perma Stat-Crete Static Dissipating Concrete Finish 1 Quart 16/case
1-26LG-04 Light Gray Perma Stat-Crete Static Dissipating Concrete Finish Gallon 4/case
1-26LG-05 Light Gray Perma Stat-Crete Static Dissipating Concrete Finish 5 Gallon Each
1-26B-16 Beige Perma Stat-Crete Static Dissipating Concrete Finish 1 Quart 16/case
1-26B-04 Beige Perma Stat-Crete Static Dissipating Concrete Finish Gallon 4/case
1-26G-05 Beige Perma Stat-Crete Static Dissipating Concrete Finish 5 Gallon Each
1-26LB-16 Light Blue Perma Stat-Crete Static Dissipating Concrete Finish 1 Quart 16/case
1-26LB-04 Light Blue Perma Stat-Crete Static Dissipating Concrete Finish Gallon 4/case
1-26LB-05 Light Blue Perma Stat-Crete Static Dissipating Concrete Finish 5 Gallon Each

Specifications

  • Gloss: Stin/Matte Finish
  • Solids: 35 ±1%
  • Resistivity-ASTM D257: >1.4E04, <1.0E06 RTG on concrete substate @ 40% rH. Meets ESD S20.20-2007. 91.7 @ <3.5E07
  • Static Decay: <0.1 seconds per FTMS 101B, Method 404
  • Static Generation ESD STM 97.2: <25 V on concrete Substate
  • pH: 6 ±0.5
  • Weight per Gallon: 9.1
  • Compressive Strength (on 3 Mil Vinyl Tile): Static Load DIN 16961.2 > 2500 psi
  • Hardness: 30 (Sward)
  • Indentation/Impact Resistance DIN EN 433 Average <5%, maximum single reading 8%
  • Abrasion resistance (ASTM D1044): SC-10-F Wheel, 550 Gm Weight. Cycle 10,000, % gauge loss 1.6
  • Viscosity: 400-600 CPS
  • Flash Point: >212°F
  • Freeze/Thaw Stability: Do Not Freeze
  • Dry Time: Dry to touch 5-7 hours. Open for traffic 10-12 hours
  • Slip Resistance (ASTM F 609): >.5 SCOF
  • Coverage: 450-600 ft2 per gallon
  • Film thickness @450 ft2 per gallon: Appoximately 3 mil wet, 1.1 mil dry
  • Odor: Moderate (Glycol Ether, Acetone)
  • VOC Content: ≥;350 grams/liter