G3 Sterile
Nitrile gloves provide the primary shield required to prevent contact with infectious substances, including bloodborne pathogens, and reduce the risk of cross-contamination.
- Textured fingertips enhance grip while providing excellent tactile sensitivity
- Available 12" lengths, sterile pairs
Purple Nitrile™ is a Trademark of Kimberly-Clark Worlwide, Inc.
SPECIFICATIONS
| Code | Size | Palm Width* (mm) | Length* (mm) | Quantity |
|---|---|---|---|---|
| 55080 | XS | 70 | 242 | 100 gloves/box; 10 boxes/case |
| 55081 | S | 80 | 242 | 100 gloves/box; 10 boxes/case |
| 55082 | M | 95 | 242 | 100 gloves/box; 10 boxes/case |
| 55083 | L | 110 | 242 | 100 gloves/box; 10 boxes/case |
| 55084 | XL | 120 | 242 | 90 gloves/box; 10 boxes/case |
| 55091 | S | 80 | 252 | 50 pairs/box; 4 boxes/case |
| 55092 | M | 95 | 252 | 50 pairs/box; 4 boxes/case |
| 55093 | L | 110 | 252 | 50 pairs/box; 4 boxes/case |
*As measured by ASTM D 6319; 2.5 AQL S-21
Extended length gloves have the same specifications as 55080-55084 but have 12" length/305 mm.
GENERAL DESCRIPTION
Styles 55080-55084: Purple nitrile, powder-free, exam, non-sterile, textured fingertips, ambidextrous gloves, beaded cuff, and single chlorination, 9.5"
Styles 55091-55093: Purple nitrile, powder-free, exam, sterile, textured fingertips, ambidextrous gloves, beaded cuff, and single chlorination, 9.5"
| Physical Property | Unit | Upper Limit | Test Method (1.5 AQL) |
|---|---|---|---|
| Watertightness | NA | Pass | ASTM D 5151 |
| Sterility (55091-55093 only) | SAL | 10-6 | ANSI/AAMI/ISO 11137 |
| Thickness | Nominal | Nominal | Test Method (2.5 AQl) |
| Middle Finger | 5.91 mil | 0.15 mm | ASTM D 6319 |
| Palm | 4.72 mil | 0.12 mm | ASTM D 6319 |
| Cuff | 3.54 mil | 0.09 mm | ASTM D 6319 |
| Property | Tensile Strength | Ultimate Elongation | Median Force at Break |
| Before Aging | 21.0 Mpa | 550% | 11 Newtons |
| After Aging | 21.0 Mpa | 500% | 9 Newtons |
| Test Method (2.5 AQL S-2) |
ASTM D 412 ASTM D 6319 ASTM D 573 |
ASTM D 412 ASTM D 573 ASTM D 6319 |
EN 455-2 |
