Ansell Kimtech™10 in. or 12 in. Ambidextrous Gloves
Packaged in a Class 100 Cleanroom. AQL level of 1.5 for pinholesTextured palm & fingers. Beaded cuff, 10" length. Double-bagged with case liner. Recommended for ISO Class 5 or higher cleanroom environments.
Caution: This product contains natural rubber latex which may cause allergic reactions. Certificate of Analysis Chemical Resistance Database
- ISO 5 (Class 100)
- Textured palms and finger tips
- 10" and 12" lengths
- Beaded cuffs
- Ambidextrous
- Natural rubber latex for tactile sensitivity & comfort
SPECIFICATIONS
| CODE | AFFILIATE # | SIZE | PALM WIDTH* (mm) |
LENGTH* (mm) |
Quantity |
|---|---|---|---|---|---|
| 56813 | HC220 | S | 85 | 255 | 100 gloves/bag 10 bags/case |
| 56814 | HC330 | M | 96 | 255 | 100 gloves/bag 10 bags/case |
| 56815 | HC440 | L | 112 | 255 | 100 gloves/bag 10 bags/case |
| 56816 | HC550 | XL | 118 | 255 | 100 gloves/bag 10 bags/case |
| 56809 | HC2211 | S | 85 | 305 | 100 gloves/bag 10 bags/case |
| 56810 | HC3311 | M | 96 | 305 | 100 gloves/bag 10 bags/case |
| 56811 | HC4411 | L | 112 | 305 | 100 gloves/bag 10 bags/case |
| 56812 | HC5511 | XL | 118 | 305 | 100 gloves/bag 10 bags/case |
*As measured by ASTM D 3577;2.5 AQL1
GENERAL DESCRIPTION
Natural rubber, powder free, cleanroom gloves, straight finger, ambidextrous former with non-slip/textured finish at palm and fingers, beaded cuff, 10" or 12" nominal length. KIMTECH PURE G5 Latex gloves are certified Category III PPE classified by EC Council Directive 89/686/EEC.
Physical Property
| Physical Property | Unit | Upper Limit | Test Method (1.5 AQL) |
|---|---|---|---|
| Watertightness | NA | Pass | ASTM D 5151 |
| Particulate Level ≥0.5 microns | #/cm2 | 3000 | IEST-RP-CC005 |
Thickness
| Codes | Section | Nominal | Nominal | Test Method (2.5 AQL) |
|---|---|---|---|---|
| 56813-56816 | Middle Finger | 8.27 mil | 0.21 mm | ASTM D 6319 |
| Palm | 7.09 mil | 0.18 mm | ASTM D 6319 | |
| Cuff | 4.72 mil | 0.12 mm | ASTM D 6319 | |
| 56809-56812 | Middle Finger | 8.27 mil | 0.21 mm | ASTM D 6319 |
| Palm | 7.09 mil | 0.18 mm | ASTM D 6319 | |
| Cuff | 4.72 mil | 0.12 mm | ASTM D 6319 |
1 AQL levels defined according to ISO 2859-1 (current edition) Sampling Procedures for Inspection by Attributes.
