Microflex® 93-260 is a thin, chemical resistant disposable glove made of an innovate, synthetic composite material for tough chemical protection. The extra soft formulation and ergonomic design provides a comfortable fit and feel for extended wear times.
- Three layer design for superior protection against harsh chemicals including acids, solvents and bases
- Thin mil construction provides enhanced tactility and dexterity
- Extra soft material and ergonomic design for outstanding fit, feel and flexibility for longer wear time
- Lower acceptable pinhole rate (0.65 AQL) and extended cuff for reliable protection against hazardous substances
- Silicone free formulation and processing ensure better product protection
SPECIFICATIONS
| Glove Profile | 93-260 |
|---|---|
| Material | Nitrile + Neoprene |
| Color | Green outside, blue inside |
| Glove Design | Ambidextrous, Powder-Free, Textured fingers, Heavy Weight Product |
| Cuff | Beaded |
| Manufacturing/QMS Audit Standards | ISO 9001 |
| Regulatory/Standards Compliance | COMPLIANT WITH ASTM D6977 & D6319, PPE 89/686, EN 420, 388 & 374 CATEGORY III |
| Packaging | 50 gloves per dispenser box, 10 dispenser boxes in a shipper box |
| Storage | Keep out of direct sunlight; store in a cool and dry place. Keep away from sources of ozone or ignition. |
| Country of Origin | Sri Lanka |
| User Needs Segment | High Risk Glove – Extended cuff gloves to provide additional protection for the wrist and forearm. |
PHYSICAL PROPERTIES
| Typical Values | Testing Method | ||||||
|---|---|---|---|---|---|---|---|
| 5.5-6 XS |
6.5-7 S |
7.5-8 M |
8.5-9 L |
9.5-10 XL |
10.5-11 XXL |
ASTM D3767/EN 420 | |
| Length (mm/inches) | 300/11.8 | 300/11.8 | 300/11.8 | 300/11.8 | 300/11.8 | 300/11.8 | |
| Average Palm Width | 78 | 89 | 98 | 111 | 116 | 122 | |
| Freedom from Holes (Inspection Level I) |
0.5 AQL | ASTM D6319-10/ASTM D5151=06 (2011) | |||||
| Palm Thickness Single Wall | (mm: 0.198)/(mil: 7.8) | ASTM D3767/EN 420 | |||||
| BEFORE AGING | AFTER AGING | ||||||
| Ultimate Tensile Strength | 22 Mpa | 26 Mpa | ASTM D6319-10 | ||||
| Elongation at Break (%) | 620 | 26 Mpa | ASTM D6319-10 | ||||
| Force at break (N) | 16 | 17 | EN 455-2 | ||||
